|
GARTER SPRING COILING EQUIPMENT:
1. Simplex Rapid Garter Spring Joiner SP1&2 –DS.
Serial No 1801.New in 1980.
2. Simplex Rapid Garter Spring Joiner SP3-S.
Serial No 1788.1.New in 1982.
3. Wafios FSI-1 Garter Spring mechanical coiler.
Serial no. 2 2321 302.
4. Wafios FSI-11 Garter Spring computerized coiler.
Serial No 2 2320 020.
5. Power wire payoff uncoilers built by PJW for
garter spring coilers. DC drive variable
speed. 150lb load capacity *
6. Wafios Garter Spring Joiners (2) for parts
7. Tapered gauges for checking inside assembled
diameter for garter springs. Chrome plated. Divided
into .002 divisions. Range from .375 to 6.0 inches.
Each gauge is approx. six inches long and divided
into .002 increments. Comes with heavy duty storage
unit with pull out drawers.
__________________________________________________________________
SPRING COILERS:
1. TORIN W11A: Two machines for sale PJW # W11A1
and W11A3
2. Simplex Rapid A2S93 : 5mm max. wire size
3. Wafios SFMU 4570 Mechanical Torsion Coiler:
Wire range 1.0mm to 4.5mm.
4. Asahi NSF-2 Multislide Extension/torsion
computerized coiler: Serial no. 41741. 8 stations.
Large selection of tooling.
5. EXCEED MTS-23 Torsion Computerized Coiler: 0.5 –
2.3mm Wire dia. Range. 200mm Maximum Wire Feed.
New 1999. Very few running hours on this machine.
__________________________________________________________________
POWER WIRE UNCOILERS:
1. Torin W59B wire pay off swift: maximum weight
100lbs, wire feed 300ft minute, max coil size
26inch. pjw# ps116
2. AWC D19 Series Model D-25: 1,200lbs Max Cap.,
.010 -.090” wire range, 0-158 RPM, 32” Dia Table.
Can handle reels, carriers and loose coils. PJW #
PS143
3. AWC D19 Series Model D-19: 300lbs Max Cap., .010
-.050” wire range, 0- 237 RPM, 26” Dia Table.
Can handle reels, carriers and loose coils. PJW # PS
271
4. Spring Tools Co: Model EPR 350. PJW # PS117
__________________________________________________________________
IN LINE STRESS RELIEVING OVENS:
1. Gasden Ro TBC-175: Conveyor belt is 4 3/8” wide,
Heating Zone is 38.5” long.
2. JN Oven Model 300: Conveyor belt is 9.5” wide,
Heating Zone is 60” long (PJW # 2).
3. PJW built stress relieving oven: Twenty
foot long heating chamber with four feet at each end
for loading and
unloading, maximum operating temperature 600
degrees F, variable speed drive. Electrical panel
recently re-wired. The oven is setup to handle three
foot wide trays
__________________________________________________________________
SPRING END GRINDERS:
1. OMD MA12-3 Down Feed Grinder: Twin 25 inch
(600mm) wheels. Vertical spindle. M/C
#2894.002 S/N 2894.82.1
2. Bennett-Mahler SG2-14: Twin 14” grinder. (2
machines for sale - Wallbank #3 and #1)
3. Bennett-Mahler SG1-14: Single 14” grinder. (3
machines for sale)
4. Spring Tools Co: Model EPR 350. PJW # PS117
__________________________________________________________________
DUST COLLECTORS:
1. WILKERS 4,000 CFM dust collector: Puchased New,
never used 5hp - SEE SHOT PEENING EQUIPMENT*
2. Unimaster DCE 450-2 dust collector: 7.5hp
__________________________________________________________________
SHOT PEENING EQUIPMENT:
1. Wheelabrator Tumblast shot peener: serial number
A129412. Push button controls. Bucket elevator. Just
rebuilt and rewired. (on hold)
__________________________________________________________________
MISCELLANEOUS SPRING & WIRE EQUIPMENT:
1. Bennett-Mahler HB1 Wire Bower: Pneumatic
activated.
2. Bennett-Mahler HB2 Wire Bower: Pneumatic
activated.
3. Bennett-Mahler HB3 Wire Bower: Pneumatic
activated. Two machines.
4. Gunther MK 2 Spring Looper: approx. .050” max
wire size. Needs air valve repairs
5. Enerpac Turbo II air hydraulic press
cylinder\pump\ h stand and gauges. Brand new.
6. Straighten and cut machine, .060" MAX (PJW
BUILT).
7. Maktel coiling pin grinder: Type PTM 1/1987.
Machine N/R 088-27000
__________________________________________________________________
VIBRATORY PARTS BOWL FEEDERS:
1. SYNTRON Ten inch bowl, three units for sale.
2. SYNTRON 20 inch bowl.
3. SYNTRON 30 inch bowl.
4. MOORFEED 20 inch bowl.
5. PERFORMANCE FEEDER INC. vibratory bowl feeder. 2
rows. S/N 294281.
__________________________________________________________________
For more information,
contact Keith Wallbank - (519) 684-7423
|
|
|
