3 Reasons Why the Automotive Industry Needs Quality Transmission Coil Springs

By in ,

Coil springs are mechanical devices used to store energy, absorb shock, and maintain a force between surfaces. These springs are fundamental to a vehicle’s transmission, which is why high quality springs are so important in the automotive industry. Dual-clutch, continuously variable, and modern automatic transmissions all rely on springs.

An automobile is made up of thousands of parts, but the transmission is one of the most important components. It drives the power from the engine to the wheels so your car can actually move. Without a good transmission, your car won’t be very good. That’s why the springs that go into the transmission must be of good quality.

1. Improve Component Performance

A car’s performance depends on a properly working transmission, which everyone in the automotive industry knows. And the springs need to be high quality to ensure that maximum reliability and force requirements are met. For example, in both computerized and non-computerized transmissions, the Valve Body tells the transmission when it is time to shift. The Valve Body directs the hydraulic pressure based on the car’s speed by allowing the pressure to build up against valves with a spring behind them. When the pressure is high enough to compress the spring the valve moves prompting the correct shifts by allowing oil pressure to get to the clutch plates for the next gear. Additionally, springs are used in many other areas of a transmission including the rear seal. These seals are often helped by a spring to control and maintain the hydraulic fluid flow and avoid leakages. The spring holds the seal’s neoprene in contact with the vehicle’s spinning shaft.

Naturally, if any of these transmissions springs were low in quality, the entire transmission system would be put at risk. All of its components are vital for its effective performance on the road.

2. Create Fuel Savings

High-quality springs allow a vehicle’s transmission to work at top efficiency, which can lead to fuel savings. The smoother the car can shift from one gear to the other at the right time without a hitch, the less gasoline it will need to use. The performance and design of the transmission can leave you with more money in your pocket. If the transmission coil springs aren’t working properly—if they’re allowing the valves to stick or weakening—the more trouble your car will have when shifting.

3. Eliminate Maintenance Issues

Of course, consumers want to buy vehicles that last. They spend a lot of money on their cars, so they expect durability. Without quality springs in the vehicle’s transmission, manufacturers can’t guarantee that it will last for the long haul. Inferior springs can easily break over a short period of time, leading to a higher rate of needed repairs. No one wants to be taking a vehicle to the repair shop every other week, which is why using high-quality components during the manufacturing process in the automotive industry is vital. The manufacturer will get a bad rap—with terrible reviews—if its vehicles’ transmissions don’t stand up to the test of time. And this can cost them a lot of business.

Quality Transmission Coil Springs for a Quality Vehicle

In the automotive industry, all of a vehicle’s components are important—but some are more important than others. This is especially true of the springs used in the transmission. Without a properly functioning transmission, the vehicle wouldn’t be able to function, so when searching for a spring manufacturer, quality should be a top priority. The transmission’s performance, fuel efficiency, and maintenance rely on it.

Automotive Wire Formings Design

Learn How we helped provide a cost effective process for ongoing manufacturing.

Leave a reply